Can you side load an eye bolt?
If the load is applied sideways, the eye bolt may bend. Pack washers between the shoulder and the load surface to ensure that the eye bolt firmly contacts the surface. Make sure that the nut is properly torqued.
How much weight will an eye bolt hold?
For example, an eye bolt with a 1/4 inch shank can typically hold up to 600 pounds at a straight pull (no angle). However, at a 15 degree angle, the maximum weight capacity drops to 480 pounds (80% of the “straight pull” weight capacity).
What are shoulder eye bolts used for?
Shouldered Eye Bolts
These eye bolts are designed with a shoulder at the point where the eye and the shank come together. This shoulder design reduces bending stresses on the shank and allows the eye bolt to be used for angular lifting if the shoulder is properly seated in the load.
How many types of eye bolts are there?
Types and Styles of Eye Bolts
The most common types of eye bolts used in industrial applications are: nut eye bolts, machinery eye bolts and screw eye bolts. All three types come in two styles: plain and shoulder. Each type comes in different sizes and finishes.
What can be used to align the eye of a shouldered eye bolt?
When eyebolts cannot be properly seated and aligned, a steel washer or spacer with the smallest inside diameter that will fit the eyebolt shank may be used to put the plane of the eye in the direction of the load when the shoulder is seated.
What is the safe working load for a 1 eye hook?
Shoulder Eye Bolts
|Shank Diameter||Working Load Limit In Linepull (lbs.)||Working Load Limit Angle Less Than 45° (lbs.)|
How much load can a m16 bolt take?
Grade 8.8 Bolt Loading Capacities Table
|Diameter of Bolt||Tensile Stress Area At||Bearing Capacity in kN (Minimum of P End distance equal to 2 x bolt diameter Thickness in mm of material passed through|
How much weight can a 3/8 eye screw hold?
Plain Eye Bolt – 3/8 inch x 3 inch size, Stainless Steel, Type 316. Working Load Limit (WLL) : 600 lbs. Thread Size: 3/8″ – 16 UNC.
What is a shouldered bolt?
A shoulder screw, also called a shoulder bolt, has a shank with a larger diameter immediately below the head that “steps down” to a smaller diameter for the threaded length. … This allows a shoulder screw to be firmly fastened to one part without clamping the other part, allowing it axial clearance.
What’s the difference between a ring bolt and an eye bolt?
Unlike eye bolts, which remain stationary for the duration of a lift, hoist rings can pivot 180° and/or swivel 360° from the screw’s axis to accommodate load movement. Unlike eye bolts, the WLL of a swivel hoist ring is not impacted by angular lifts.
What is a machinery eye bolt?
A machinery eye bolt has a threaded shank that is intended for use with tapped holes that have been engineered as a lifting point. Carbon steel or 304 stainless steel lifting eye bolts are available. Shoulder design reduces stress on the shank during angular lifts.
What is a hex bolt?
Hex bolts, or hex cap screws, are large bolts with a six-sided head (hexagonal!) used to fasten wood to wood, or metal to wood. … Wood screws have many different types of heads, but the most common are round heads and flat heads.
What is screw eye?
Screw eyes are a screw with a loop on one end and threads on the other end. Screw eyes are commonly used to attach cables to objects, for instance attaching a string to the back of a painting to allow the painting to hang from a nail on a wall.
What is a forged eye bolt?
On the right is a high strength forged eyebolt with a shoulder to support off-axis loads. By Dr. Jody Muelaner. An eyebolt is a mechanical fastener with a threaded shaft and a head forming a ring. Eyebolts are used to attach an eye to a structure, through which rope, cable or shackles can be secured.