Can I reuse toilet flange bolts?

you must have one of the old cast iron flanges and yes it will crack if you bang on it. If the threads are ok then by all means reuse them. How are the bolts connected to the flange? They are likely too short now so you may have to think of something.

Should you replace toilet flange with new toilet?

If you notice a lot of water pooling at the base of your toilet and inspect to find that your flange is cracked or broken, it’s time for a replacement. Make sure to properly measure your drain pipe and drain to ensure that you choose a replacement flange kit that is the right size. Loose or broken wax rings.

Does the toilet flange need to be bolted?

The flange should be fastened to the floor. Dry fit the toilet to make sure it doesn’t rock. If it does rock, use shims to prevent rocking – just tightening the bolts probably will not stop the rocking but will risk cracking the toilet or breaking the flange.

IT IS INTERESTING:  How can you tell the strength of a metric bolt?

Are toilet bolts standard?

The job of the toilet bolt is to help create a watertight seal between the toilet bowl and the toilet flange and to secure the toilet to the floor. There are three possible measurement distances you can get from the wall to the toilet bolt: 10 inches, 12 inches, or 14 inches. The most common is 12 inches.

Can you put a new toilet flange over an old one?

Either slide the new closet flange bolts into the old flange before adding the extender or add them after you adhere the extender to the old flange. Consequently, we chose to add one of the bolts to the old flange first since it was a tight fit. Add metal washers and nuts to the closet flange bolts.

How often does a toilet flange need to be replaced?

Between the toilet and the flange is a wax seal. The wax keeps water from leaking as it passes from the toilet to the drain pipe. It also seals against foul sewer gas odors. A wax seal will often last the life of the toilet, 20 or 30 years, without needing to be changed.

Are toilet bolts universal?

One pair bolts with double nuts and washers for toilet upside and bottom. 3. Universal fit for most toilet.

How do you remove old toilet flange bolts?

Grip the top of one of the bolts with adjustable pliers, then fit an adjustable wrench around the nut. Hold the bolt steady while you turn the nut counterclockwise. Once it begins turning, release the bolt and keep unscrewing the nut. If it sticks again, hold the bolt steady once again with the pliers.

IT IS INTERESTING:  What kind of wood are dowels made from?

How long does a toilet flange last?

It requires no maintenance and can last 30 or more years, often as long as the toilet itself. But sometimes wax rings can dry out, crumble, and fail prematurely. When that happens, they need to be replaced. The telltale sign of wax ring failure is water leaking out from around the base of the toilet.

What size are most toilet bolts?

Tank Bolts are proven durable, and the 5/16” size x 2 ¾” length will fit most brands and models.

How do you remove toilet bolts?

Try turning the nut on the anchor bolts counterclockwise with a wrench. Insert a screwdriver through the hole in the bowl of the toilet and push the bolt to the side. Turn the wrench counterclockwise while holding the bolt sideways to remove the nut.

How tight do toilet bolts need to be?

Exactly – the point of the bolts is to hold the toilet in place, NOT to create the seal. The seal is created by the wax ring. One quarter turn too far on that bolt and you’ve ruined a multi hundred dollar toilet. If it doesn’t move when you sit on it, it’s tight enough!