What type of screws should you use with pressure treated lumber?

If you use regular screws with pressure treated wood, they may bend or slip and can become corroded by the preservative chemicals contained in the wood. Thus, we recommend using 305 or 18-8 grade stainless steel screws with an advanced anti-corrosive coating, like the Hillman Fasteners’ DeckPlus 48419 screws.

Can you use regular screws in pressure treated wood?

Commonly available galvanized screws are either mechanically galvanized or electro-galvanized. … Mechanically galvanized screws are generally suitable for decks and other outdoor projects made of pressure-treated lumber.

Are stainless steel screws OK for treated lumber?

Corrosion-resistant stainless steel screws, nails and bolts in grades 304 and 305 can be used for copper-treated wood in most areas, while grade 316 should be used in coastal areas. But stainless steel fasteners can cost five to 10 times more than similar galvanized fasteners.

Do you need special screws for treated lumber?

No special fasteners are required when building with borate pressure treated wood.” … The fasteners used with the product shall be carbon steel, galvanized steel, stainless steel, copper, and silicon bronze.”

IT IS INTERESTING:  You asked: How do you adjust the idle screw on a carburetor?

Are GRK screws good for pressure treated wood?

GRK fasteners are ICC code approved for exterior use in ACQ pressure treated lumber and have the strength to meet all your general construction needs. A building inspector will be able to use an ESR report to code approve your construction projects.

What does GRK screws stand for?

oK – stupid question – whats GRK stand for? Green River Killer. BUIC Sep 01, 2007 02:55pm #16. GRK is a brand of high quality screws.

Can you use zinc coated screws in pressure treated wood?

Fasteners for preservative-treated wood shall be of hot dipped zinc-coated galvanized steel, stainless steel, silicon bronze or copper. … In the absence of manufacturer’s recommendations, a minimum of ASTM A653 type G185 zinc-coated galvanized steel, or equivalent, shall be used.

Are galvanized nails oK for treated wood?

For most applications, however, best nails for pressure treated lumber are either hot dipped galvanized nails and bolts. … For screws we recommend using ones that have a protective coating that is designed for use with pressure treated lumber. one example would be Outlaw fasteners.

How long should deck screws be?

Most decking screws are 8-gauge and, while 2 1/2 inches is the minimum length needed to hold decking boards to the joists, 3-inch screws are commonly used to provide extra holding power against the upward pressure of shrinking or warping boards. Specialty decking materials have different requirements.

Should I use screws or nails on my deck?

The Consensus: For a deck build it’s best to use a combination of nails and screws. … Screws are superior for laying down the decking. They hold things flush better and have a better fastener/tensile strength, which keeps boards from popping up over time.

IT IS INTERESTING:  How many stainless steel screws are in a pound?

Will pressure treated wood corrode metal?

Pressure treated wood is a popular product for outdoor construction, i.e. bridges and decks. … When wood treated with the new chemicals was exposed to metal parts, the metal tended to corrode, even moreso in water contact environments, in only a few years.

Does pressure treated wood corrode steel?

1. The ACQ-D pressure treatment formulation is generally more corrosive to most coated steel products. Some products are more susceptible than others. Since corrosion requires water and contact with the preservatives, designs should focus on eliminating wetness and direct contact with the wood.