# What size bolt does a 15/16 wrench fit?

Contents

## What size Bolt uses a 15/16 wrench?

Bolt Diameter Head and Wrench Size
Hex Bolt – Lag Bolt – Square Bolt Heavy Hex Bolt
1/2″ 3/4″ 7/8″
9/16″ 13/16″
5/8″ 15/16″ 1-1/16″

## What size bolt uses 15mm wrench?

I believe that the bold that goes with the 15mm wrench is normally an M8. M8s usually use 12 or 13mm heads.

## What size thread is a 15/16 nut?

Heavy Hex Nut Dimensions

Nominal Size or Basic Major Thread Diameter H
Thickness
7/8 .8750 55/64
1 1.0000 63/64
1-1/8 1.1250 1-7/64

## How do you determine bolt size?

A typical rule of thumb . . . Use a bolt diameter that is 1.5 – 2.5 times (up to three times) the thickness of the thinner material you are bolting together. So, for 1/8″ material, a 1/4″ diameter is often a good bolt choice. For 1/4″ thick material, perhaps a 3/8″ or 1/2″ bolt.

## What are bolt sizes?

To measure the diameter of screws and bolts, you measure the distance from the outer thread on one side to the outer thread on the other side. This is called the major diameter and will usually be the proper size of the bolt.

IT IS INTERESTING:  You asked: Is there going to be a bolt 2 movie?

## What size head is an M6 bolt?

SOCKET HEAD CAP SCREW – METRIC

M3-0.5 3.00 5.50
M4-0.7 4.00 7.00
M5-0.8 5.00 8.50
M6-1.0 6.00 10.00

## What size metric bolt has a 13mm head?

Bolt Diameter (mm) Head/Wrench Size (mm)
ANSI/ISO DIN/ISO Heavy Hex
5 8
6 10
7

## What size Bolt uses a 14 mm socket?

Metric / Standard Wrench Conversion Chart

Bolt Diameter Metric Standard
5/16″ 13mm 1/2″
3/8″ 14mm 9/16″
7/16″ 16mm 5/8″
1/2″ 19mm 3/4″

## How do I know what size wrench I need?

Multiply the first number which is the bolt size in inches or millimeters, by 1.5 using a pocket calculator, if necessary. For example, for the numbers in Step 1, 1/2 x 1.5 = . 75 or 3/4, which is the wrench size needed for this standard-sized bolt.

## What size nut fits a 1/2 bolt?

US Nut Size Table

Size Diameter*
Hex Nut Machine Screw Nut
1/2″ 3/4″
9/16″ 7/8″
5/8″ 15/16″

## What is the TPI of 1/2 20 thread?

Bolt Size Threads Per Inch (TPI)
3/8″ 16 24
7/16″ 14 20
1/2″ 13 20

## How do I choose the right bolt?

This is how you choose the right bolt for the joint:

1. First, identify the load case.
2. Determine the necessary clamping force in the joint.
3. Choose the smallest bolt diameter that can support the clamp load.
4. Choose an effective bolt securing method.
5. Decide on the most appropriate tightening method.

## What size is a 17mm bolt?

Size Chart

IT IS INTERESTING:  What is the meaning of screw driver?
Bolt size Size Tolerance
16mm 16.35
M10 17mm 17.40
7/16″UNF 11/16″ 17.86
18mm 18.40

## How do you match a bolt with a nut?

Bolt, Nut and Washer Sizes

Match this outer diameter of a bolt to the inner diameter of a nut and a washer. For SAE nuts and bolts, diameters of 1/4 inch and smaller are listed with a # and a whole number (a bolt with a major diameter of 3/16 inch is a #10 bolt). Smaller numbers indicate smaller diameters.