What size are cabinet handle bolts?

Standard #8-32 threading is common for the majority of cabinet knobs and pulls.

What size screws do cabinet handles use?

The majority of cabinet knobs are packaged with #8 machine screws, which measure 0.16 inch, or roughly 5/32 inch, in diameter. Use a 3/16-inch bit to drill the hole.

Are cabinet handles standard sizes?

For standard size cabinetry (dimensions of 12″ – 36″) the most common pull sizes are 3”, 4”, 96mm, and 128mm center to center (from one screw hole to another).

What size is cabinet hardware?

There is no right or wrong size to choose, but we do recommend choosing pulls that have at least a 3-3/4″ center to center (the distance between the screw holes). This size looks pleasing on most cabinets, while still being large enough to grip comfortably. 5″ pulls are also an excellent choice.

What size drill bit do I use for drawer pulls?

Always use a drill bit slightly larger than the screw you are using. If the screw does not go in freely, it will strip out and break off inside the drawer or door. A 3/16″ drill bit is recommended for the standard 8/32″ screws.

IT IS INTERESTING:  Frequent question: What size are Samsung TV screws?

What is a #8 screw?

Wood Screw Diameters

Size Major Thread Diameter*
Decimal Nearest Fractional Measurement
#6 .138″ 9/64″
#7 .151″ 5/32″
#8 .164″ 5/32″

How do you measure for cabinet pulls?

Place the drawer pull on a work surface with the threaded posts facing up. Measure from the center of the screw hole in one threaded post over to the center of the other screw hole with a tape measure. This is the measurement required when selecting replacement pulls.

What size cabinet pulls for 36 inch drawers?

Pulls 3-7 inches in length will sit the most comfortably on doors less than 24 inches tall. Cabinet doors 24-36 inches tall are best adorned with pulls 7-12 inches long, while cabinets taller than 36 inches such as pantries, built-in appliances and pullouts should be accompanied by pulls longer than 12 inches.

What size pulls for 39 inch cabinets?

Determine Size

While there is no set rule, we generally recommend that the pull length is approximately 1/3 of the cabinet or drawer width.

What is the rule of thumb for cabinet hardware?

An oversized cabinet door or drawer needs a large piece of hardware for proper functionality. … A good rule of thumb for traditional or transitional style pulls is that they should be about one-third of the length of the cabinet drawer. Drawers larger than eighteen inches wide may require more than one pull or knob.

Should I use knobs or pulls on kitchen cabinets?

There are no strict rules to follow when choosing whether to select a knob or a pull or both. One preference is to use knobs for all doors and pulls for all drawers. For any large door such as a pantry and any pull-out door (including pull-out base pantries or trash pull-outs), use a pull.

IT IS INTERESTING:  What screwdriver is needed to open a joy con?