What is the meaning of 10 9 grade bolt?

Grade 10.9 metric bolts are manufactured using medium carbon steel, medium carbon steel alloy and low carbon boron steel that has been quenched and tempered. Used in automotive applications and for bolting large and forged parts, metric 10.9 bolts exhibit high tensile strength and good wear resistance.

What does 10 9 mean on a bolt?

The High Tensile Grade 10.9 Screw is a special type that does not need nuts to fix it onto other components. This grade of bolts have tensile strength upto 1040 minimum and yield strength up to 940MPa minimum. The Grade 10.9 Stainless Steel Bolt Material Properties make them applicable in engine parts and components.

Is Grade 8 or 10.9 stronger?

Class 10.9 is stronger than class 8.8. It is commonly found in high strength automotive applications. Class 10.9 is similar to grade 8. A low carbon steel for general use.

What is a Grade 10 bolt?

Class 10. This is a metric nut grading similar to the SAE grade 8 classification, which is used in conjunction with Class 10.9 bolts. This strength of nut is used in automotive, and structural industries, as well as in high temp applications.

IT IS INTERESTING:  How tight u joint bolts?

Are Grade 10 bolts stronger than Grade 8?

Each grade has a specific bolt strength. No matter the system used to grade the bolts, the higher number means the stronger the bolt. For most home and automotive applications, you won’t need anything more than a grade 8 bolt strength or metric class 10.9.

What does 9.8 mean on a bolt?

A metric bolt designated as ISO class 6.8 roughly corresponds in strength to an SAE Grade 2 bolt. Bolts of ISO class 8.8 and the slightly stronger class 9.8 roughly correspond to an SAE Grade 5 bolt. An ISO Class 10.9 bolt roughly corresponds to an SAE Grade 8 bolt.

What is the strongest bolt?

Grade 9 structural bolts, also known as grade 9 hex cap screws, are one the strongest structural bolts that can be used today. While the typical grade 8 bolt has a tensile strength of 150,000 PSI, a grade 9 bolt has a tensile strength of 180,000PSI.

What is a class 10 nut?

Class 10 nuts are metrics nuts with a steel grade equivalent to the SAE grade 8 classification. These are high-strength steels used in the automotive and structural industries.

What is a Grade 10 bolt made of?

Grade 10.9 metric bolts are manufactured using medium carbon steel, medium carbon steel alloy and low carbon boron steel that has been quenched and tempered. Used in automotive applications and for bolting large and forged parts, metric 10.9 bolts exhibit high tensile strength and good wear resistance.

What is 8.8 on a bolt?

The grade 8.8 refers to the tensile strength which is generally 116,000 psi, grade 10.9 is generally 150,000 and grade 12.9 is generally 175,000 psi.

IT IS INTERESTING:  What are Kreg screws used for?

How hard is a Grade 10 bolt?

They have a tensile strength of 125,000 psi and a shear strength of 76,000 psi, but the most important difference is that they are not as brittle as SAE bolts.

What size is a 8.8 Bolt?

Metric hex bolts, Zinc plated class 8.8 steel, 8mm x 1.0mm x 60mm.

Is Grade 8 or 8.8 Stronger?

Table 1.

Grade/Class Strength
Grade 5 Medium strength.
Grade 8 High strength.
Metric Class 4 Similar to Grade 2.
Metric Class 8.8 Similar to Grade 5.

What do numbers on bolts mean?

The first number in each size is the nominal or root (minor) diameter (mm) and the second number is the thread pitch (mm). NOTE: Remember that the nominal bolt diameter is the measurement of the bolt diameter as taken from the bottom of the threads NOT the top (which would be major diameter).

What grade is a stainless steel bolt?

Stainless commonly comes in grades 18.8 (304) or T316. Stainless steel bolts are rated for corrosion resistance. Bolt strength is rated in PSI (pounds per square inch). A stainless steel bolt has the same PSI rating as a grade 5 bolt (125,000 PSI).