The 2007 Ford Fusion has a wheel bolt pattern of 5 lug 4.5 inches, with a high positive offset of 114.3 mm. This is the pattern, typically of three, lug holes that You will need to follow if You intend to mount a new rim or tire onto Your car.
What is the bolt pattern on a Ford Fusion?
The bolt pattern for a ford fusion is pcd 5×108 (5×4. 25) .
What is 5×114 bolt pattern?
The 5×114. 3 Bolt Pattern or Pitch Circle Diameter (PCD) is made up of the stud count (5) and the bolt circle measurement (114.3), the notional circle determined by the center position of the studs. The 5×114.3 bolt pattern is common to Acura, Alpine, Aston Martin, BAIC, BYD, Baojun and Changan vehicles.
What is the bolt pattern on a 2007 Ford Focus?
Ford Focus 2007, 16″ 5-Spoke Silver Alloy Factory Wheel by Replace®. Size: 16″ x 6″. Bolt Pattern: 4 x 108mm. Offset: 52.5mm.
What cars use 5×114 3 bolt pattern?
The most popular cars with PCD 5×114,3 are: Honda Civic oraz Accord, Nissan Qashqai, Dacia Duster, Hyundai i30 and x35, Renault Megane III and Laguna III, Kia Cee’d, Sportage and Venga, Mitsubishi Lancer, Outlander and ASX, Toyota Auris and Avensis III, Citroen C-Crosser, Suzuki SX4, Fiat Sedici, Mazda 3.
What is the bolt pattern for a 2008 Ford Fusion?
The bolt pattern of the 2008 ford fusion is 5 lug 4.5 Inch 114.3Mm high positive offset.
What is 5×100 bolt pattern in inches?
Bolt pattern conversion chart between metric and inches:
|Bolt pattern in metric||Bolt pattern in inches (SAE)|
|3-lug bolt patterns|
|5 x 100 mm||5 x 3.94″|
|5 x 108 mm||5 x 4.25″|
|5 x 110 mm||5 x 4.33″|
What is Ford stud pattern?
Find Your Stud Pattern
|Stud Pattern||Stud PCD||Common Stud Size|
|FORD||5 x 114.3mm||1/2″|
|COMMODORE||5 x 120mm||7/16″|
|HQ HOLDEN||5 x 120.65mm||7/16″|
|HT HOLDEN||5 x 108mm||7/16″|
How do I find the bolt pattern on my car?
Measuring Your Bolt Pattern
- Remove the existing wheel (the rear wheel is usually the easiest to measure because the hub normally won’t be in the way).
- Measure from the middle of one stud to the outside of the second stud (skipping a stud).
- The number you see will be the actual measurement of the bolt pattern.
What vehicles have a 5×4 bolt pattern?
It was used on the Ford Fairlane, Ford Mustang and many other cars through the years. The 5×4. 5-inch bolt pattern is typically known as a “small Ford” pattern and can also be listed as 5×4-1/2 inches.
Does 5×108 fit 5×114 3?
StanceMagic – 1.25 inch (32mm) Wheel Adapters (Changes Bolt Pattern) Converts 5×108 to 5×114. 3, 12×1. 5 Studs, Compatible with Ford Jaguar Lincoln Volvo (5×4. 25 to 5×4.
What size tire is on a 2007 Ford Fusion?
This wheel adaptor set converts a 5×100 VW/Audi vehicle with a 57.1mm hub bore to 5×108. The adaptor features a 57.1mm center bore allowing hubcentric fitment to your vehicle. These adaptors are available in a range of thicknesses from 15mm-35mm.