What is the advantage of the screw jack over the ratchet jack?

What is the advantage of the screw jack over the ratchet jack? In the heaviest jacks the screw is operated by an air motor for faster lifting and lowering without effort.

When it’s desired to change the direction of pull in a tackle system it is necessary to use a <UNK> block?

It also moves with the load as the load is moved. Figure 6-5. —Snatch blocks. blocks are used when it is necessary to change the direction of pull on the line.

Which component of a chain hoist is the weakest part?

Rope and pulley

The pulley and sheave blocks suitable for lifting rough surfaces and heavy loads. For this purpose, the chains and wire ropes are used. The alloy chains are best suited for hoisting operation. The weakest component of this system is the load hook.

IT IS INTERESTING:  How do you clean screw threads?

What is the mechanical advantage of a simple block and tackle with one rope?

What is the mechanical advantage of a simple block and tackle with one rope? The mechanical advantage is 2, requiring a force of only 50 N to lift the load.

Is a wheel with a concave edge for supporting a moving rope that is changing direction?

A wheel with a concave edge for supporting a moving rope that is changing direction. Also known as a pulley. The abrupt application of force to an object.

What is No of falls in hoist?

No of falls : the physical no of rope lengths counted between the wire rope drum and the hook block. Hook center to center : horizontal distance between centers of main and auxiliary hooks.

What is the difference between hoisting and rigging?

As verbs the difference between rig and hoist

is that rig is to fit out with a harness or other equipment while hoist is to raise; to lift; to elevate; especially, to raise or lift to a desired elevation, by means of tackle or pulley, as a sail, a flag, a heavy package or weight.

Can I use a chain hoist to pull horizontally?

(Hand) chain hoists, typically, can only be used vertically. If they are used to move the load horizontally, the chain will get jammed and gears inside can be damaged to shorten the lifespan.

What is the mechanical advantage of the block and tackle?

The mechanical advantage of a block and tackle is equal to the number of time the same line is attached to or runs through the moving block. The pulley on the left does not have a block on the Bale. When you pull on the rope, you are pulling the full weight of the bail.

IT IS INTERESTING:  You asked: What should a 1/2 bolt be torqued to?

What is the mechanical advantage of the block and tackle used to lift the bale of cotton?

What is the mechanical advantage of the block and tackle used to lift the bale of cotton? has a mechanical advantage of 1 and does not make work easier.

How do you calculate the advantage of block and tackle?

In a block and tackle, some friction in the pulleys will reduce the mechanical advantage of the machine. To include friction in a calculation of the mechanical advantage of a block and tackle, divide the weight of the object being lifted by the weight necessary to lift it.

Is an edge treatment on woven material that helps prevent unraveling?

Signaling Test

Question Answer
A ? is an edge treatment on woven material that helps prevent unraveling selvedge
The typical safety factor for web slings is 5. T/F True
A ________________ is an overlap of webbing material that is sewn together. splice
A size 5 roundsling is _____________________ in color. Red

What is crane block?

A Load Block is the assembly of hook, swivel, bearing, sheaves, pins and frame and is suspended by hoisting ropes or load chains. It is used to lift and move objects up to a specific lifting capacity. Visit us at our Homepage for more crane terms.

What is the most important thing to remember about a basket hitch?

Basket hitches

Provide relatively good control and eliminate the tendency of the load to twist, compared with a vertical hitch. Do not use basket hitches with a load that is difficult to balance.