What bolt pattern does an Audi have?

I agree those wheels lend themselves to BMW’s but as long as the offset works BMW, Merc, and Audi all have a 5×112 bolt pattern.

What is the bolt pattern on an Audi?

Audi – Vehicle Bolt Pattern Reference

YEAR MAKE COMMENTS
2014 Audi 5 lug 4.41 inch or 112mm High Positive Offset
2008 Audi 5 lug 4.41 inch or 112mm High Positive Offset
2009 Audi 5 lug 4.41 inch or 112mm High Positive Offset
2010 Audi 5 lug 4.41 inch or 112mm High Positive Offset

What cars use 5×112 bolt pattern?

The 5×112 bolt pattern is mainly associated with Audi, BMW, Mercedes-Benz, and Volkswagen cars.

Is 5×120 the same as 5×112?

well, 5×120 is a larger radius than 5×112 so shouldnt the imaginary circumference made by the lug pattern & distance between each hole fit? or do i have ****ed up logic.

What bolt pattern does an Audi A4 have?

Bolt pattern: All A4/S4/A6/S6/A8/S8 models are 5 x 112. The only modern Audi’s with the 5 x 100 patterns are the transverse motor types like the TT.

Do Audi and BMW have the same bolt pattern?

I agree those wheels lend themselves to BMW’s but as long as the offset works BMW, Merc, and Audi all have a 5×112 bolt pattern.

IT IS INTERESTING:  Which way does nose Screw go?

Will 5×114 wheels fit 5×112?

Reversely ff your car has a 5×114. 3 hub you can put a 5×112 wheel on it using these wobble bolts. A very convenient feature if say the wheels you want are out of stock in the lug bolt pattern you need. These bolts will also work as standard lug bolts if you plan on swapping wheels often.

What BMW uses 5×112?

Nearly all BMWs have 5 lug bolts in a 120mm bolt circle. Beginning with the G01 7-series chassis in 2009, all G-chassis use a 5×112 bolt pattern – the same number of lug bolts but in a 8mm tighter circle. This is also the spec used by Audi, VW, and Mercedes.

Will Audi wheels fit a Mercedes?

Those hub rings are at every wheel shop you go to for every adaptation you can think of. But there is no way you can fit a wheel that was specifically made to an Audi center bore to go on a Benz without resizing the bore to our specs. But the bolt pattern is fine.

What is bolt pattern 5×112?

The 5×112 Bolt Pattern or Pitch Circle Diameter (PCD) is made up of the stud count (5) and the bolt circle measurement (112), the notional circle determined by the center position of the studs. The 5×112 bolt pattern is common to Aiways, Alfa Romeo, Audi, BMW, BMW Alpina, Bentley and Borgward vehicles.

Can I put 5×120 on 5×112?

They definitely work but they won’t work on 5×120 wheels. They are only meant for a small variation (ie: 5×112 to 5×114. 3). If you want to run 5×120 wheels you will need adapters or to redrill the wheels.

IT IS INTERESTING:  Quick Answer: What is the importance of screwdrivers?

What are wobble bolts?

What are Wobble Bolts? The correct term is PCD Variation Bolts. This type of bolt has a unique rotating washer collar that sits beneath the hex and above the threaded stud. The 60° tapered collar is able to move 2.3mm in any given direction.

Are Audi and VW wheels interchangeable?

yes, they will fit but they are called wheels.

Will a 5×115 fit a 5×112?

Nope, they won’t work. Wobble bolts only accommodate a difference of 2mm.

Does 5×112 fit 5×100?

Registered. 5×112 and 5×100 is bolt pattern, an offset number would be +35 or -35. They won’t fit at all unless you get adapters.