What are long bolts called?

Lag screws, also called lag bolts, are large wood screws.

What are different types of bolt heads?

Head Shapes

The most common type of bolt head types includes square, hex, slotted hex washer and socket cap. The earliest bolt heads in use were the square heads. Square heads consist of a square indentation on the head followed by a shaft that withstands rotation when a torque is applied to it.

What are 7 types of fasteners?

Different Types of Fasteners. Mechanical fasteners come in many forms, including screws, nails, nuts, bolts, washers, anchors and rivets. Each of these different types of fasteners is a category unto itself, with many types to choose from.

What are the two types of bolts?

The principal types of bolts commonly used include:

  • Anchor Bolts.
  • Blind Bolts.
  • Carriage Bolts.
  • Double End Bolts.
  • Eye Bolts.
  • Flange Bolts.
  • Hex Bolts.
  • Machine Bolts and Machine Screws.

What is a shank bolt?

The shank is the threadless part of the bolt between the head and thread. There are two main ways of using the shank of the bolt. One is to make the shank increase the shearing capacity. … When bolts are being used as tension bolts, they should be more elastic than the joint members.

IT IS INTERESTING:  How do I report a bolt driver in South Africa?

What is a long bolt?

A long-bolt or through-bolt engine is an internal combustion piston engine where, following usual practice, the cylinder head is held down by bolts or studs. Conventionally the cylinder head is bolted to the cylinder block and the crankshaft main bearings are in turn bolted to the crankcase by separate bolts.

How many types of threads are there?

Six Most Common Types of Threads

NPT/NPTF. BSPP (BSP, parallel) BSPT (BSP, tapered) metric parallel.

What is a screw anchor?

Screw anchors are inserts, typically made from plastic, metal, or fiber, which enable the attachment of screws into brittle materials — such as masonry or dry wall.

What are nails and screws called?

Fasteners are hardware devices that mechanically join objects together and can include bolts, screws, nails and more.

What are the three types of fasteners?

There are three main types of threaded fastener; Bolts, Screws and Studs.

What are the different sizes of bolts?

There are no fewer than 5 different threads for different applications and 10 different standard strength grades defined for each size of bolt.

Spanner and Allen Key Sizes.

Size Spanner Allen Key
M5 8 mm 4 mm
M6 10 mm 5 mm
M8 13 mm 6 mm
M10 17 mm 8 mm

What is a flange bolt?

Used in automotive applications, plumbing, and more, flange bolts feature a washer like flange beneath the bolt head that speeds production time and distributes the clamping load, offering protection to the mating surface.

What are bolts without head called?

Carriage bolt – Bolt with a smooth rounded head and a square section to prevent turning followed with a threaded section for a nut. Elevator bolt – Bolt with a large flat head used in conveyor system setups. Hanger bolt – Bolt that has no head, machine threaded body followed by a wood threaded screw tip.

IT IS INTERESTING:  Are ARP LS head bolts reusable?

What is a smooth bolt called?

Carriage Bolt

A bolt with a smooth rounded head. The vast majority of carriage bolts have a square neck. This is a small square section under the head that prevents spinning during assembly. Carriage bolts are primarily used in wood.

What are mechanical bolts?

A bolt is a mechanical fastener with a threaded shaft. Bolts are closely related to screws, which are also mechanical fasteners with threaded shafts. … A bolt is inserted through parts which all have unthreaded holes and a nut is then screwed onto the bolt to provide a clamping force and prevent axial movement.

What are hollow bolts called?

Alloy Steel Hollow-Lock Set Screws

Also known as jam set screws, these lock other screws in place, hold pins, and adjust spring tension.