The goal of using anti-seize compound is to coat the threads with the compound preventing corrosion and adhesion between the thread and the fastener. … There is no reason to use more anti-seize than absolutely necessary on the threads you are coating.
Should you grease suspension bolts?
Why You Should Grease
Greasing chassis parts allows the flow of fresh lubricants to all critical areas. … A part completely full of grease is an excellent seal because there is no place for water to occupy.
Where should you not use anti-seize?
Anti-seize can not be applied on already damaged or cross threaded threads of bolts. The threads need to be chased, re-tapped or repaired before applying anti-seize. Don’t use anti-seize on exposed threads as it may attracts contaminates that may contribute to thread damage.
Do you need Loctite on suspension?
Not required and not needed. I’d stay away from loctite. I usually put a dab of antisieze on the suspension bolts, so I can get them off later.
Do shock bolts need Loctite?
You can use grease on the shock bolts but you do need Loctite on the small Stainless bolt that threads into the forward bolt. The shaft of the forward bolt can be lubed as well as the entire rear bolt.
Should I grease rear shock bushings?
The new bushing should drive its way into the shock eye, pushing the old one out as it does so. … Don’t apply any grease or lube to the bushing surface – it’ll just cause the coating to break down and flake off.
Do you grease shock mounts?
on the Husaberg the shock bolts are thick steel through a plastic bushing in the eye and it comes with caution about no grease. it’s meant to be metal on lubricious plastic.
How long does Anti Seize last?
Anti-Seize Special™ has a shelf life of 5 year or more when stored in a closed container. Shelf life may be much longer depending upon storage location and conditions. Store with container tightly sealed in a cool dry place for optimum shelf life.
Does anti seize affect torque?
The torque applied to a fastener with an antiseize compound pre- applied to the threads will ensure uniformity through out the process but will increase the Clamp Load compared to an unlubricated bolt. … Torque values may also have to be reduced when the fastener is threaded into aluminum or brass.
How do you use anti seize bolts?
Screw the nut on the bolt all the way up the shaft. Then, unthread it off. This fills in the anti-seize evenly between the bolt and the threads, ensuring proper coverage for effective lubrication. Apply under the bolt head before installing.
Does Threadlocker prevent seizing?
Threadlocker. So anti-seize prevents fasteners from seizing up, so you would think that thread locker does the opposite; it prevents the screw from coming out, and you would be correct. But like anti-seize, it also prevents the screw from seizing up. … Thread locker keeps your screws from rusting into place.
Does anti seize seal threads?
Anti-seize materials protect threaded and slip-fitted metal parts from rust, corrosion, galling and seizing at high temperatures. … Specific formulations cater for the type of metal used for the threads, as well as temperature extremes.
Does Loctite prevent corrosion?
It protects threads from rust and corrosion and prevents loosening from shock and vibration. Loctite® Threadlocker Blue 242 is particularly suited for applications on less active substrates such as stainless steel and plated surfaces, where disassembly is required for servicing.
What’s the difference between anti seize and Loctite?
It’s in the name…
Aluminium frame btw. Loc-tite is designed to hold bolts in place or tight, if you will. Anti-seize is designed to prevent bolts from seizing and consequently snapping or rounding the head. You’re welcome.
Is Loctite Anti Seize?
LOCTITE® anti-seize lubricants deliver superior performance across a wide range of applications and materials. … High temperature anti-seize lubricants within the Henkel range display the following characteristics: High resistance to galling, corrosion, and seizure.