Quick Answer: Can I use stainless steel bolts on treated lumber?

Hot-dip galvanized or stainless steel fasteners, anchors and hardware are recommended by the Preservative Treated Wood Industry for use with treated wood. This has been the position of this industry for years and their position has not changed with the transition to the alternative copper-based products.

Are stainless steel screws OK for treated lumber?

Corrosion-resistant stainless steel screws, nails and bolts in grades 304 and 305 can be used for copper-treated wood in most areas, while grade 316 should be used in coastal areas. But stainless steel fasteners can cost five to 10 times more than similar galvanized fasteners.

Can you put metal on treated lumber?

Pressure treated wood does not work well with metal. The reaction to the chemicals in the wood and copper which is a dissimilar metal cause the metal to rust. It is recommended that you always use untreated pine or spruce stringers to attach the metal to.

What type of screws should be used with treated lumber?

If you use regular screws with pressure treated wood, they may bend or slip and can become corroded by the preservative chemicals contained in the wood. Thus, we recommend using 305 or 18-8 grade stainless steel screws with an advanced anti-corrosive coating, like the Hillman Fasteners’ DeckPlus 48419 screws.

IT IS INTERESTING:  What size hole do I drill for a 3/8 lag bolt?

Can zinc bolts be used with treated lumber?

Fasteners for preservative-treated wood shall be of hot dipped zinc-coated galvanized steel, stainless steel, silicon bronze or copper. … Fasteners other than nails and timber rivets shall be permitted to be of mechanically deposited zinc coated steel with coating weights in accordance with ASTM B 695, Class 55 minimum.

Do you need special screws for pressure treated wood?

No special fasteners are required when building with borate pressure treated wood.” … The fasteners used with the product shall be carbon steel, galvanized steel, stainless steel, copper, and silicon bronze.”

Does pressure treated lumber corrode steel?

1. The ACQ-D pressure treatment formulation is generally more corrosive to most coated steel products. Some products are more susceptible than others. Since corrosion requires water and contact with the preservatives, designs should focus on eliminating wetness and direct contact with the wood.

Does pressure treated wood eat aluminum?

Does Treated Wood Corrode Aluminum? Yes. … Total failure caused by corrosion can occur in less than a year. Many contractors isolate aluminum flashing and trim from pressure treated lumber with building tape or house wrap.

Is Treated lumber corrosive?

Using pressure-treated lumber (PT) in home construction is very effective in reducing wood destroying insect activity, but it has the adverse effect of causing corrosion on most hardware and fasteners.

Does pressure treated wood eat screws?

Treated wood is typically used in applications where it may be exposed to moisture for considerable periods so any fasteners and connectors used with treated wood must also be resistant to these conditions.

IT IS INTERESTING:  Frequent question: What size screws 2x4?

Are wood screws stainless steel?

Stainless steel wood screws are partially threaded with a shoulder. … One of the more popular types of stainless steel wood screws are stainless steel deck screws. Deck screws typically come in 305 stainless steel.

What bolts to use on a deck?

At connections carrying structural loads, such as deck ledgers or railing posts, use through-bolts or lag screws. Through-bolts are stronger and should be used where possible. For the most critical connections on a deck, such as where ledgers attach to the house or to railing posts, use 1/2-inch bolts or lag screws.

Can I use Galvanised screws in treated pine?

All bolts, screws, nails plus brackets, framing anchors and other hardware in contact with preservative treated pine should be hot dipped galvanised, monel, silicone bronze or stainless steel. Electroplated fasteners are not suitable due to early break down of the plating.

What is hot dipped galvanized bolts?

Hot-dip galvanizing, in which steel fasteners are dipped in a hot bath of zinc, is a particularly effective way to form a protective layer of zinc that offers excellent defense against corrosion, including outstanding durability, uniformity of coverage and longevity.