# Question: What are the actual dimensions of a metal stud?

Contents

The flange of metal studs measures 1 5/8 inches, slightly larger than the narrow face of a nominal piece of 2-inch dimensional lumber, which in modern times really measures 1 1/2 inches. A stud with a web size, or long face, of 3 1/2 inches is termed a 350S and takes the place of a two-by-four.

## What are standard metal stud sizes?

Here are some examples of metal stud sizes as it relates to the thickness:

• 26 gauge (0.551 mils)
• 24 gauge (0.701 mils)
• 22 gauge (0.853 mils)
• 20 gauge (1.006 mils)
• 18 gauge (1.311 mils)
• 16 gauge (1.613 mils)
• 14 gauge (1.994 mils)

## What are the actual dimensions of a 2×4 metal stud?

A 2×4, for example, is really 3-1/2″ x 1-1/2″. Metal framing on the other hand, is referenced by actual size. As a result you will get exactly what you order. If you request a 3-5/8″ steel stud, you will receive a full 3-5/8″ width.

## What is the width of a 3 5 8 metal stud?

Exterior Structural

Member Depth Flange Width Material Thickness (GA)
3-5/8″ – 12″ 1-3/8, 1-5/8″, 2″ & 2-1/2″ Leg 14 ga 68 Mil
3-5/8″ – 12″ 1-3/8, 1-5/8″, 2″ & 2-1/2″ Leg 12 ga 97 Mil
2-1/2″ – 12″ 1-1/4″ – 1-1/2″, 2″ & 2-1/2″ Leg 20 ga 33 Mil
2-1/2″ – 12″ 1-1/4″ – 1-1/2″, 2″ & 2-1/2″ Leg 18 ga 43 Mil

## How are metal studs measured?

Determine how far apart the steel studs will be located and divide the linear feet of the perimeter by that number. Steel studs are typically located 16 inches apart so divide the perimeter in inches by 16. If the perimeter is 60 feet, or 720 inches, then 45 steel studs will be needed.

## What are the dimensions of a stud?

Two-by-six and two-by-four are the most common dimensions of wall studs. Standard walls of 8 feet have wall studs that are 92 inches. The studs are 104 1/2 inches in homes with 9-foot walls.

## What gauge is structural steel studs?

These studs and track are manufactured from mill certified galvanized steel and are designed for use in curtain-wall and load bearing applications. Thicknesses range from 33 mils (20 gauge) to 97 mils (12 gauge).

## How wide is a framing stud?

Typical dimensions of today’s “two by four” is 1.5 by 3.5 inches (38 mm × 89 mm) dimensional lumber and typically placed 16 inches (406 mm) from each other’s center, but sometimes also at 12 inches (305 mm) or 24 inches (610 mm).

## Are there 4 metal studs?

4 in x 12 ft x 18 Gauge 43 mil Structural Steel Stud w/ 1 5/8 in Flange. These studs and track are manufactured from mill certified galvanized steel and are designed for use in curtain-wall and load bearing applications. … Flange or leg sizes for both studs and track range in a variety of sizes.

## How wide is a 2×6 steel stud?

Thicknesses and Coatings

Steel Framing Thickness Table
Designation Thickness (mils) Minimum Thickness (in) Galvanized Thickness
43 0.0428 G60
54 0.0538 G60
68 0.0677 G90
IT IS INTERESTING:  You asked: How much torque can a Grade 5 bolt take?

## How thick is a 20 gauge metal stud?

For example, 20-gauge interior wall partition studs have a thickness of 0.76 mm (30 mil), while 20-gauge structural studs have a minimum thickness of 0.84 mm (33 mil).

## How thick is a 6 metal stud?

A 600S metal stud measures 6 inches on its web, or long face. Thus a metal stud taking the place of a two-by-four measures 1 5/8 by 4 inches, and a two-by-six, 1 5/8 by 6 inches — slightly fatter but the same depth as their wood equivalents.

## What is code for stud spacing?

Utility grade studs shall not be spaced more than 16 inches (406 mm) on center, shall not support more than roof and ceiling, and shall not exceed 8 feet (2438 mm) in height for exterior walls and load-bearing walls or 10 feet (3048 mm) for interior nonload-bearing walls.