Anti seize is no good for slide pins, it tends to solidify and not do its job very well for what it needs to to. I use a dab of blue loctite on the bracket bolts and a leave the caliper bolt threads dry. Never had an issue with those seizing, even in PA.
Where should you not use anti seize?
Do not use anti-seize as a lubricant such as on caliper slide pins or on threads for a bushing press or any mechanical assembly that requires a lubricant. Do not use anti-seize on exposed threads because the compound can attract contaminants that may contribute to thread damage when the fastener is removed.
Should you lubricate caliper bolts?
Before putting the caliper bolts back into their spot, they need to be lubricated properly. Brakes are one of the hottest places for your car, so you’re going to need high-temperature grease. This lubricant is synthetic and can withstand the high temperatures that your car’s brakes will reach.
Does anti seize affect torque?
The torque applied to a fastener with an antiseize compound pre- applied to the threads will ensure uniformity through out the process but will increase the Clamp Load compared to an unlubricated bolt. … Torque values may also have to be reduced when the fastener is threaded into aluminum or brass.
When should you use anti seize?
Anti-seize should be used when two metals are involved (similar or dissimilar), when threads may be exposed to corrosion and fastener that frequently get removed.
Is anti seize toxic?
Hazardous reactions: No known hazardous reactions. Inhalation: Material may be an irritant to mucous membranes and respiratory tract. Skin contact: Contact with skin may result in irritation. Ingestion: Swallowing can result in nausea, vomiting and irritation of the gastrointestinal tract.
Should you use Loctite on caliper bolts?
The repair manual says “Apply a high temperature thread locker (Loctite 272® or equivalent) to the caliper support bracket fasteners. If Loctite 272® (or equivalent) is not available, new caliper support bracket fasteners must be used.”
What happens if you don’t grease caliper pins?
This lack of lubrication causes a few things to happen. First, because the brakes don’t contact the rotor properly, your brake pads can wear unevenly. Second, the slide pins may stick, causing the brake pad to continually contact the rotor, resulting in a buildup of heat, which wears your brake pads down faster.
Is anti seize the same as brake grease?
What Is Anti-Seize? Anti-seize is also a greasy lubricating substance, but unlike brake grease, it can take some heat. It can withstand temperatures up to 2600 degrees, thanks to its high-solids content. The flip side of that is that it can’t be applied to fast-moving metals.
How long does Anti Seize last?
Anti-Seize Special™ has a shelf life of 5 year or more when stored in a closed container. Shelf life may be much longer depending upon storage location and conditions. Store with container tightly sealed in a cool dry place for optimum shelf life.
Does anti seize seal threads?
Anti-seize materials protect threaded and slip-fitted metal parts from rust, corrosion, galling and seizing at high temperatures. … Specific formulations cater for the type of metal used for the threads, as well as temperature extremes.
Can you use anti seize on gaskets?
Anti seize compounds can also improve gasket performance as well as help with the removal process of a gasket. Anti seize lubricants can help to prevent thread galling during installations which can cause problems and incur additional costs.
How do you use anti seize bolts?
Screw the nut on the bolt all the way up the shaft. Then, unthread it off. This fills in the anti-seize evenly between the bolt and the threads, ensuring proper coverage for effective lubrication. Apply under the bolt head before installing.