How is a Grade 5 bolt identified?

Grade 5 Bolts and fasteners are made of medium strength carbon steel and are specified under the Society of Automotive Engineers (SAE). … Grade 5 bolts can often be identified by the 3 marks on the head. Each Grade 5 bolt from U-Bolt-It are available zinc plated.

How can you tell if a bolt is a Grade 5?

Grade 5 bolts are case hardened, meaning the bolt has been heated enough to hardened the outside of the bolt but not enough to harden the inside portion. Grade 5 bolts are identified by 3 evenly spaced radial lines on the head.

What are the markings on a Grade 5 bolt?

Bolt Grade Markings and Strength Chart

Head Marking Grade and Material Mechanical Properties
Min. Yield Strength (psi)
3 Radial Lines Grade 5 Medium carbon steel, quenched and tempered 92,000
6 Radial Lines Grade 8 Medium carbon alloy steel, quenched and tempered 130,000

How do you tell what grade bolt you have?

You can usually figure out the grade, or strength, of a bolt by looking at the markings on its head. English bolts (U.S.S. or S.A.E) are categorized by grade, from grade 2 to grade 8, where the grade represents inch strength. The higher the grade, the stronger the bolt.

IT IS INTERESTING:  What does bolting behavior mean?

How can you tell the difference between Grade 8 and Grade 5 bolts?

Grade 8 bolts have been hardened more than grade 5 bolts. Thus they are stronger and are used in demanding applications such as automotive suspensions. Grade 8 bolts have 6 evenly spaced radial lines on the head. Grade G is roughly equivalent to Grade 8.

What material is a Grade 5 bolt made of?

Grade 5. Grade 5 alloy steel is a medium carbon zinc plated alloy steel that is heat treated to increase hardness. Grade 5 bolts have three (3) evenly spaced hash marks on the head markings (manufacturers mark may also be included).

How do bolt grades work?

Bolts are made of different grades of steel. The grade of a bolt determines the maximum amount of stress (tensile strength) that the bolt can handle. Tensile strength is the amount of pull the bolt can withstand before breaking. … The SAE marking system uses raised dashes on the bolt head to indicate strength.

What are Grade 5 bolts used for?

These bolts are generally used for non-critical joints and applications. A grade 5 bolt is distinguished by 3 radial lines and promises tensile strengths between 105,000 and 120,000 psi. They are most commonly found in automotive applications.

What is a grade A bolt equivalent to?

Table 1.

Grade/Class Strength
Grade A Nuts Strength exceeds Grade 2.
ASTM A325 Bolts meet ASTM A325 Type 1 standards for structural steel joints.
Grade B Nuts Strength is similar to Grade 5.
Grade B7 Threaded Stud & Rod Same as Grade 5. Use with Grade 2H and Grade C nuts.

What is the shear strength of a Grade 5 bolt?

For example, an SAE grade 5 hex cap screw has a specified minimum tensile strength of 120,000 psi. Therefore, for design purposes, its shear strength could be reasonably assumed to be 70,000 psi.”

IT IS INTERESTING:  Frequent question: What should bolts be torqued to?

What does 8.8 on a bolt mean?

A property class (PC) is the metric equivalent of a grade in inch series terminology. … So, in English, a PC 8.8 bolt is a bolt with a nominal tensile strength of 800 MPa and a nominal yield strength that is 80% of the bolt’s nominal tensile strength, or 640 MPa.

What is the difference between Grade 2 and Grade 5 bolts?

Grade 2 is a standard hardware grade steel. This is the most common grade of steel fastener and is the least expensive. Except a possible manufacturer’s mark,Grade 2 bolts have no head marking. Grade 5 bolts are hardened to increase strength and are the most common bolts found in automotive applications.

Are stainless steel bolts stronger than Grade 5?

Stainless Steel Grades & Strength

Bolt strength is rated in PSI (pounds per square inch). A stainless steel bolt has the same PSI rating as a grade 5 bolt (125,000 PSI). A grade 8 bolt has a stronger rating with a PSI of 150,000.

How much weight can a Grade 5 bolt hold?

Proof Load

Nom Bolt Size (in) Grade
2 5
5/16 2900 4450
3/8 4250 6600
7/16 5850 9050