How does expansion anchor bolt work?

Once inserted into the hole in the concrete, the nut is turned clockwise. This action pulls the anchor body up, which slides the expansion clip down the cone-shaped working end of the wedge anchor. The clip is then expanded and wedges between the anchor body and the concrete.

How do anchor bolts expand?

The hardened nail is struck by a hammer and, as it is driven into the anchor body, the anchor body expands against the inside walls of the hole in the base material. … The designated diameter of the single expansion anchor is equal to the diameter of the bolt used with the anchor.

What is the difference between anchor bolt and expansion bolt?

The anchor bolt allows a smooth screw to be stressed by mechanical locking force; The expansion bolt mainly generates friction by pressing, and the force is applied.

How do concrete expansion screws work?

The sleeve anchor is inserted into a hole drilled in the base material (either concrete, brick or block). The nut is turned, which pulls the stud up through the expander sleeve, expanding it up against the inside wall of the base material.

What are expansion anchors?

Expansion anchors can be used to describe the majority of concrete and masonry anchors. Anchors of this type are designed with an expansion mechanism that compresses against the base material. … Compression anchors may also be pre-expanded and/or used in conjunction with a drive nail.

IT IS INTERESTING:  Do they make Grade 8 stainless steel bolts?

Do expansion bolts work in drywall?


When a screw is inserted into the anchor, the split ends of the shank spread, expanding and putting pressure on the inside of the drywall to hold it securely. Expansion anchors are: Often made of plastic but may also be made of nylon or zinc-coated metal.

How far apart are anchor bolts placed?

Placement is approximately every 6 to 8 feet depending on code, with one not more than 12 inches from each end of a wall bottom plate. Make sure not to put a J-bolt in the middle of a doorway.

How much weight can a concrete anchor bolt hold?

These concrete anchor bolts, or bolt anchors for wood, are available in several sizes and will hold up to 200 lbs. The sleeves pinch the sides of the predrilled hole and get tighter as you tighten the screw or bolt. Best uses: Concrete, concrete block, mortar and brick.

Is an expansion anchor a wedge anchor?

The wedge anchor is the only mechanical expansion anchor used in different environments that are available in four types based on plating or the steel from which it is manufactured.