Frequent question: What size is a 16mm bolt?

What size is M16 bolt in MM?

Dimensions for DIN931 Hex Head Bolt

Diameter (d) Pitch Across Flats (s)
M10 1.5mm 17mm
M12 1.75mm 19mm
M14 2mm 22mm
M16 2mm 24mm

What size is a M16 bolt in inches?

Table 3.

Metric Closest Inch
M12-1.75 1/2-13 (Larger)
M14-2.0 9/16-12 (Larger)
M16-2.0 5/8-11 (Smaller)
M18-2.5 3/4-10 (Larger)

How are M16 bolts measured?

Measure the length from underneath the head to the end of the bolt. This includes the shank, if your bolt has one. A shank is an unthreaded part underneath the head. If you are measuring a countersunk screw make sure to measure the entire length.

What is an M16 bolt?

Metric bolts are made fractionally under their stated size, for instance an M16 bolt will have a shank diameter of typically 15.97mm. This means that a 16mm bolt will fit through a 16mm hole but to allow for misalignment between parts it is common practice to drill bolt holes slightly larger.

Is an M12 bolt 12mm?

M12 is a 12mm diameter thread. You have to be sure the thread pitch measured in threads per millimeter (1.5 here) is the same as what u need.

IT IS INTERESTING:  What are the different modes of bolt joint failures?

How wide is a M12 thread?

Thread Geometry – Metric Coarse

Thread Major Diameter Pitch Diameter
M12 12.0 10.863
M14 14.0 12.701
M16 16.0 14.701
M18 18.0 16.376

How many inches is 16mm?

16mm = 5/8 inch.

What size thread is a 17mm nut?

Size Chart

Bolt size Size Tolerance
16mm 16.05
M10 17mm 17.05
7/16″UNF 11/16″ 17.51
18mm 18.05

What size bolt fits a 14mm socket?

Metric / Standard Wrench Conversion Chart

Bolt Diameter Metric Standard
1/4″ 11mm 7/16″
5/16″ 13mm 1/2″
3/8″ 14mm 9/16″
7/16″ 16mm 5/8″

How do you tell what size a bolt is?

To measure the diameter of screws and bolts, you measure the distance from the outer thread on one side to the outer thread on the other side. This is called the major diameter and will usually be the proper size of the bolt.

What is M10 bolt size?

Metric Hex Bolt Dimensions

NOMINAL SIZE (D) BODY DIAMETER HEAD THICKNESS
m10 10.00 6.63
m12 12.00 7.76
m14 14.00 9.09
m16 16.00 10.32

What size is an M12 bolt?

M12 bolts are a metric sized bolt with a 12mm thread diameter.

What is M18 bolt?

Hex Head Bolts DIN 931 (ISO 4014) M18 in Bright Zinc Plated (BZP) Class 8 high tensile steel. … Popularly used in all assemblies, a standard hex bolt is a staple across the world. Manufactured to ISO 4014 or DIN 931, and therefore includes an unthreaded section of the shaft.

What is M12 in MM?

Standard metric spanner and allen key sizes.

Size Spanner Allen Key
M8 13 mm 6 mm
M10 17 mm 8 mm
M12 19 mm 10 mm
M16 24 mm 14 mm
IT IS INTERESTING:  Does GM make money on the bolt?