M7-1.0 x 40 mm Class 8.8 Zinc Plated Hex Bolt.
What size is a M7 bolt?
Dimensions for DIN931 Hex Head Bolt
|Diameter (d)||Pitch||Across Flats (s)|
Is there an M7 nut?
M7 (7mm) Thread Size. 5.5mm Nut Thickness (T) … 11mm Nut Width A/F (J)
What size bolts are there?
Hex Bolt, Lag Bolt, Square Bolt and Heavy Hex Bolt
|Bolt Diameter (in)||Head and Wrench Size (in)|
|1/4||7/16 or 3/8|
What is a THD bolt?
The Titen THD anchor is a high-strength screw anchor for use in cracked and uncracked concrete, as well as uncracked masonry. … Other brands with this type of concrete anchor include Powers Wedge-Bolt and LDT anchors (Large Diameter Tapcon by Redhead).
Is an M10 bolt 10mm wide?
M10 (10mm) Nut/Bolt Cap – Plastic (White) (Pack of 10)
Will a 8mm bolt fit a 5 16?
Can I use a M8 bolt on a 5/16 thread? They look pretty similar at glance… Well, quick answer is no. They are not the same and they are not interchangeable, although they can work under certain circumstances.
What are M8 screws?
The defined diameter of metric bolts is actually slightly larger than the actual diameter of the bolt shaft. So an M8 bolt would have a shaft diameter that’s slightly under 8mm which means that the bolt should fit through an 8mm hole.
What size head is on a 7/16 bolt?
Hex Bolt Head Size Chart
What size bolt fits in a 7/16 hole?
CLEARANCE HOLE CHART
|Clearance Hole Chart for Inch Fasteners|
|Nominal Screw Size||Fit Class – Normal||Fit Class – Loose|
What is the torque on a 7/16 bolt?
ASTM A449 / SAE Grade 5*
|Bolt Size||TPI||Tightening Torque (ft lbs)|