Best answer: What screws for deck joist hangers?

What screws to use for deck joist hangers?

The most common material used for joist hangers is galvanized metal. Because joist hangers are galvanized, the ideal types of fasteners are galvanized metal to avoid corrosion. Nails work well as long as they are sized correctly, but manufacturer-specified specialty screws can also work.

What size screws do you use for joist hangers?

Screws are Better for Angle Joist Hanger Fasteners

Makes an unbeatable combination. Making the best deck joist hanger connection for strength is #10 1-1/2 x 0.148″ Hot Dip Galvanized nails for the hanger face connection to the ledger or beam and SD CONNECTOR Screw #10 x 2-1/2″ for the angle connections.

Can you use Simpson screws on joist hangers?

LU210 joist hangers are also approved for installation with Simpson Strong-Tie SD Structural Connector Screws.

Can I use screws for deck joist hangers?

Outdoors use 16d double-dipped galvanized nails (or stainless steel when called for) for installing hangers. … The manufacturers agree: Never use galvanized deck screws or drywall screws to install joist hangers. Those screws don’t have the shank size and toughness to support joist loads.

IT IS INTERESTING:  Is standard for socket head cap screw?

Can you use 2×6 joist hangers on 2×8?

Usually, the hanger size is the same as the joist size, but you can use a hanger that is one dimensional size less than the joist depth—a 2×6 hanger can be used with a 2×8 joist, for instance. Keep in mind that the load capacity of the smaller hanger needs to be adequate to support the load on the joist.

What size screws 2×8 framing?

Use three 3″ screws for 2×6 headers, four for 2×8, etc. Like laying out walls and joists, use two 3″ screws for each 2×4 intersection. If two or more studs are parallel to each other, screw them together every 24″.

Do you put joist hangers on both sides?

Be careful about installing joist hangers and nailing both sides to the band board without the joist being in place. It’s easy to install the hanger so tight you can’t get the joist into the hanger. There are special tools that create the correct spacing.

Can I use deck screws for framing?

Our inspectors have seen a disturbing trend of late: people using wood or deck screws when building structural elements. This means ordinary wood screws cannot be used to attach rafters to top plates, or joists to beams.

What does GRK screws stand for?

oK – stupid question – whats GRK stand for? Green River Killer. BUIC Sep 01, 2007 02:55pm #16. GRK is a brand of high quality screws.

What is a Simpson Strong Tie used for?

They are typically used to hold down structures including racking and shelving. Included in this section are anchors, hangers, straps and tie downs used to connect and reinforce.

IT IS INTERESTING:  Best answer: How do you stop seeds from bolting?