Best answer: Do you put Loctite on axle bolts?

Yes, use blue Loctite (not red).

Should you use threadlocker on axle nut?

No. Axle nut doesn’t need it. Never used it and never had a problem with it. Pinch bolts need to be torqued properly.

Does Loctite hold loose bolts?

The blue Loctite® is semi-permanent and will balance preventing your bolt from rattling loose from daily activity while still being able to manually remove the bolt with regular tools at some point in the future, if needed.

Can you put Loctite on a nut?

Loctite Threadlocker products can be used on automotive lug nuts to keep them tightly secured on your vehicle. … Use a medium-strength Loctite Threadlocker, such as Threadlocker Blue 242, on your car’s lug nuts.

Can you reuse an axle nut?

The shop manual warns not to reuse the axle nut, so I trotted off to the parts store for a new one. … I’m referring to the special nuts on major components like axle shafts and ball joints where a lost (or loosened) nut can cause accidents, even fatal accidents.

Is Loctite 242 permanent?

Sets in 10 minutes, cures in 24 hours.


Threadlocker Blue 242 Threadlocker Red 271
IT IS INTERESTING:  Are screws used in cars?

When should I use Loctite?

We suggest using a threadlocker solution any time an assembly is going to be under strain or vibration that may result in unintended back-off or in situations where the assembly is not going to be checked for long periods of time.

How do you remove Loctite bolts?

Removing the red threadlocker involves heating the nut and bolt for a couple of minutes to a temperature of 500°F (250°C), applying localized heat using a blowtorch, for example. This will soften the thermoset plastic in the threadlocker.

What is the purpose of Loctite?

Loctite threadlockers are primarily designed to prevent fasteners from leaking or loosening from vibration. The difference between red and blue threadlocker is a matter of strength and removability.

Does Loctite work on oily threads?

Yes. LOCTITE 243 can be used on oil impregnated parts, as it can cut oil effectively and lock properly. Just clean the part once before applying the product. When we apply a threadlocker to a bolt, we hand tighten a nut down and let this sit for 24 hours to get fully cured.

How tight should my axle nut be?

The nut on the spindle should be tightened until snug, with no side-to-side play in the hub and then backed off slightly, about maybe a 1/8 of a turn.

Do I have to replace axle nut?

How important to replace axle nut with a new one every time you remove it? Official Ford service procedure states that if you have to remove an axle nut, you should discard it and replace it with a brand-new one.

IT IS INTERESTING:  Quick Answer: How strong is a lightning bolt?