Best answer: Are metal studs same size as wood?

The metal equivalents roughly match the size of the dimensional lumber — and are lighter, straighter and more uniform.

What size is a metal stud?

Metal Stud Sizes

The most common size stud is a 3 5/8″ wide stud. Combined with a layer of 5/8″ gypsum wall board on both sides will give a 4 7/8″ thick wall.

What typical size are the metal studs to be for interior walls?

Most load-bearing walls require 16 or 18-gauge studs and interior walls are built using 20 or 25-gauge metal studs.

How wide is a 3 5 8 metal stud?

Exterior Structural

Member Depth Flange Width Material Thickness (GA)
3-5/8″ – 12″ 1-3/8, 1-5/8″, 2″ & 2-1/2″ Leg 14 ga 68 Mil
3-5/8″ – 12″ 1-3/8, 1-5/8″, 2″ & 2-1/2″ Leg 12 ga 97 Mil
2-1/2″ – 12″ 1-1/4″ – 1-1/2″, 2″ & 2-1/2″ Leg 20 ga 33 Mil
2-1/2″ – 12″ 1-1/4″ – 1-1/2″, 2″ & 2-1/2″ Leg 18 ga 43 Mil
IT IS INTERESTING:  What are the 2 main screwdrivers?

What size steel studs should I use?

Standard Sizes of Steel Studs

Standard sizes range from 2 1/2 inches to 14 inches. Flanges (the side sections) range from 1 3/8 inch to 3 inches. Studs come with knockouts in place for electrical cables. Knockouts range from 3/4 inch to 1 1/2 inch diameter.

Are metal studs nominal dimensions?

Wood framing is commonly referenced in nominal terms. A 2×4, for example, is really 3-1/2″ x 1-1/2″. Metal framing on the other hand, is referenced by actual size.

Are metal studs stronger than wood studs?

Wooden studs are stronger than metal studs.

They can support a lot more weight, being made from heavier material themselves. Wooden studs can be used on load-bearing walls, new cabinets, doorways, and frames to stay sturdy and strong.

Can you build a garage with metal studs?


Metal studs require somewhat different skills and tools, but any general contractor with experience using metal studs should be able to build you a quality garage. Consider using pre-coated aluminum or vinyl siding for the walls of your garage.

What are the different gauges of metal studs?

The most common colors by gauge are: 20-gauge (33 mils), red; 18-gauge (43 mils), yellow; 16-gauge (54 mils), green; 14-gauge (68 mils), orange; 12-gauge (97 mils), blue or black.

How do I know what gauge my metal studs are?

Metal stud manufacturers are required to stamp the stud size and gauge on each product. For instance, ClarkDietrich labels 6-inch, 16-gauge studs with CD600S162-54 50 KSI. This tells you the stud is 6 inches wide with a 1-5/8 inch (1.62 inch) flange and is 16-ga (54 mils) thick.

IT IS INTERESTING:  How should screw top wine be stored?

How wide is a 2×4 metal stud?

Thus a metal stud taking the place of a two-by-four measures 1 5/8 by 4 inches, and a two-by-six, 1 5/8 by 6 inches — slightly fatter but the same depth as their wood equivalents.

Are metal studs load bearing?

Lighter gauge metal studs are used in non-load bearing applications such as some interior walls, half-walls, and partitions. … Metal studs are available in many of the same basic dimensions as wood studs. Metal studs are usually mechanically fastened with screws.

How thick is a 20 gauge steel stud?

For example, 20-gauge interior wall partition studs have a thickness of 0.76 mm (30 mil), while 20-gauge structural studs have a minimum thickness of 0.84 mm (33 mil).

Can you mix metal and wood studs?

Generally speaking, no, you should not mix metal and wood studs. There’s a reason why most materials used for a certain purpose are very uniform and standard. Since each material has a different requirement for its intended purpose, they might collide with each other and end up causing problems.

Can you use drywall screws in metal studs?

Fine-thread drywall screws are self-threading, so they work well for metal studs. Fine-thread drywall screws are best for installing drywall to metal studs. Coarse threads have a tendency to chew through the metal, never gaining proper traction.

Can you use metal studs for floor joists?

Steel has the highest strength/weight ratio of any material used for construction, so the same jobs can be completed with much less support using steel joists. … Floors that use steel joists are quieter than wood.

IT IS INTERESTING:  How do I know if I have a 12 bolt carrier?