Are all toilet bolt holes the same?

Not every toilet requires the same size hole, and clearances also vary, but there is a standard size and placement that works for most models.

Are toilet bolt holes universal?

Toilets are made to fit on standard flanges. Unless your husband has ripped out the standard plumbing and done something funny, it will work fine. We install the Toto Drake all over, it’s a quick and easy replacement.

Are toilet flanges the same size?

One common standard toilet flange size is 4×3, and this is the measurement you will find beside most flanges available at your hardware or plumbing stores. … The top side of the flange, which connects to the toilet, is 4 inches in diameter, while the bottom diameter of the pipe is 3 inches.

What size bolts hold down a toilet?

Toilet Bolt Dimensions: 5/16 in. x 2-1/4 in.

Are toilets universal fit?

When asking the question is a toilet tank universal, the short answer is no. While in certain brands they can be interchangeable, the overall consensus is that your toilet tank is fitted to your toilet model.

Are toilet tank bolts standard?

More often, toilet tank bolts are standard and will fit most types of toilet tanks. If you need to replace your toilet tank bolts, you have a high chance of finding it easy.

IT IS INTERESTING:  What number is a 3/8 bolt?

What size hole do I drill for toilet flange?

The flange pipe can have a diameter of either 3 or 4 inches, depending on the size of the waste line, but a 4-inch hole works in both cases. Plumbers cut it with a hole saw or a reciprocating saw.

How do I choose a toilet flange?

With the toilet removed, you can see the toilet flange and measure its height above the floor. The optimum flange height to aim for is 1/4 inch above the finished floor. This typically allows for almost any type of wax ring to be used and still ensure a good seal.

What are the different types of toilet flanges?

10 Different Types of Toilet Flanges (Buying Guide)

  • Copper Toilet Flanges.
  • Brass Toilet Flanges.
  • Plastic (PVC) Toilet Flanges.
  • Stainless Steel Toilet Flanges.
  • Cast Iron Toilet Flanges.
  • Aluminum Toilet Flanges.

How do you know if a toilet will fit?

If the base of the new toilet is shorter than the distance between the rear bolt holes and the wall, it should fit. In small bathrooms where space is tight, also measure from the sides of the flange bolts to the sidewalls or other objects to assure side-to-side clearance.

How can I tell what kind of toilet I have?

Identify Toilet Model Number from Serial Number

  1. On the back or side of the inside of the toilet tank.
  2. On the back of the toilet tank.
  3. On the underside of the toilet bowl.

Are all toilets the same size UK?

There is no universal standard for toilet or toilet seat sizes in the UK. However, certain patterns have developed. The following combinations of toilet seat lengths and widths are relatively popular: width 35 cm, length 40-41 cm.

IT IS INTERESTING:  Why do my drywall anchors keep breaking?